ソースを参照

These indirect variables are annoying the crap out of me. Removing them for now until I've had time to make them actually work. For now, no easily custom names for custom injection files.

tags/v2.01a1
bbruns@gmail.com 7年前
コミット
8da9f8b978
5個のファイルの変更13行の追加35行の削除
  1. +0
    -14
      etc/ipv4/custom.conf
  2. +0
    -0
      etc/ipv4/custom/prerun.sh
  3. +0
    -14
      etc/ipv6/custom.conf
  4. +6
    -0
      etc/ipv6/custom/prerun.sh
  5. +7
    -7
      lib/iptables.inc

+ 0
- 14
etc/ipv4/custom.conf ファイルの表示

@@ -1,14 +0,0 @@
# These are the custom files that can be used to inject rules during loading. Please don't change them
# unless you have a good reason.
# To allow variable propagation/change and some creative changes of rules that I haven't tought of,
# these files are sourced into the main file during setup of the order of chains.

$V4CUSTPREFIX="${FWPREFIX}/ipv4/"

$v4_Custom_Pre="$V4CUSTPREFIX/prerun.sh"
$v4_Custom_Trust="$V4CUSTPREFIX/trusted.sh"
$v4_Custom_EasyBlock="$V4CUSTPREFIX/easyblock.sh"
$v4_Custom_Filter="$V4CUSTPREFIX/filter.sh"
$v4_Custom_NAT="$V4CUSTPREFIX/nat.sh"
$v4_Custom_PortFw="$V4CUSTPREFIX/portfw.sh"
$v4_Custom_Post="$V4CUSTPREFIX/postrun.sh"

etc/ipv6/custom/prerules.sh → etc/ipv4/custom/prerun.sh ファイルの表示


+ 0
- 14
etc/ipv6/custom.conf ファイルの表示

@@ -1,14 +0,0 @@
# These are the custom files that can be used to inject rules during loading. Please don't change them
# unless you have a good reason.
# To allow variable propagation/change and some creative changes of rules that I haven't tought of,
# these files are sourced into the main file during setup of the order of chains.

$V6CUSTPREFIX="${FWPREFIX}/ipv6/"

$v6_Custom_Pre="$V6CUSTPREFIX/prerun.sh"
$v6_Custom_Trust="$V6CUSTPREFIX/trusted.sh"
$v6_Custom_EasyBlock="$V6CUSTPREFIX/easyblock.sh"
$v6_Custom_Filter="$V6CUSTPREFIX/filter.sh"
$v6_Custom_NAT="$V6CUSTPREFIX/nat.sh"
$v6_Custom_PortFw="$V6CUSTPREFIX/portfw.sh"
$v6_Custom_Post="$V6CUSTPREFIX/postrun.sh"

+ 6
- 0
etc/ipv6/custom/prerun.sh ファイルの表示

@@ -0,0 +1,6 @@
# This file is sourced by the main srfirewall program to inject
# custom commands/rules during specific moments of the firewall
# setup.
#
# In particular this file injects/commands rules:
# Before the main chains are setup.

+ 7
- 7
lib/iptables.inc ファイルの表示

@@ -83,23 +83,23 @@ function setup_iptables_chains {
# Set up rules - the order matters - we do it separately here
# for easy viewing of order
if [ -x ${v${IPVER}_Custom_Pre} ]; then . ${v${IPVER}_Custom_Pre}; fi
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/prerun.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/prerun.sh; fi
${VER_IPTABLES} -A INPUT -j ${InPreRules}
${VER_IPTABLES} -A OUTPUT -j ${OutPreRules}
if [ -x ${v${IPVER}_Custom_Trust} ]; then . ${v${IPVER}_Custom_Trust}; fi
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/trusted.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/trusted.sh; fi
${VER_IPTABLES} -A INPUT -j ${Trusted}
if [ -x ${v${IPVER}_Custom_EasyBlock} ]; then . ${v${IPVER}_Custom_EasyBlock}; fi
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/easyblock.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/easyblock.sh; fi
${VER_IPTABLES} -A INPUT -j ${InEasyBlock}
${VER_IPTABLES} -A OUTPUT -j ${OutEasyBlock}
if [ -x ${v${IPVER}_Custom_Filter} ]; then . ${v${IPVER}_Custom_Filter}; fi
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/filter.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/filter.sh; fi
${VER_IPTABLES} -A INPUT -j ${InFilter}
${VER_IPTABLES} -A OUTPUT -j ${OutFilter}
${VER_IPTABLES} -A FORWARD -j ${FwdFilter}
if [ -x ${v${IPVER}_Custom_NAT} ]; then . ${v${IPVER}_Custom_NAT}; fi
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/nat.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/nat.sh; fi
${VER_IPTABLES} -A POSTROUTING -j ${NAT}
if [ -x ${v${IPVER}_Custom_PortFw} ]; then . ${v${IPVER}_Custom_PortFw}; fi
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/portfw.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/portfw.sh; fi
${VER_IPTABLES} -A PREROUTING -j ${PortForward}
if [ -x ${v${IPVER}_Custom_Post} ]; then . ${v${IPVER}_Custom_Post}; fi
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/postrun.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/postrun.sh; fi
${VER_IPTABLES} -A INPUT -j ${InPostRules}
${VER_IPTABLES} -A OUTPUT -j ${OutPostRules}
}

読み込み中…
キャンセル
保存