浏览代码

These indirect variables are annoying the crap out of me. Removing them for now until I've had time to make them actually work. For now, no easily custom names for custom injection files.

tags/v2.01a1
bbruns@gmail.com 7 年前
父节点
当前提交
8da9f8b978
共有 5 个文件被更改,包括 13 次插入35 次删除
  1. +0
    -14
      etc/ipv4/custom.conf
  2. +0
    -0
      etc/ipv4/custom/prerun.sh
  3. +0
    -14
      etc/ipv6/custom.conf
  4. +6
    -0
      etc/ipv6/custom/prerun.sh
  5. +7
    -7
      lib/iptables.inc

+ 0
- 14
etc/ipv4/custom.conf 查看文件

@@ -1,14 +0,0 @@
# These are the custom files that can be used to inject rules during loading. Please don't change them
# unless you have a good reason.
# To allow variable propagation/change and some creative changes of rules that I haven't tought of,
# these files are sourced into the main file during setup of the order of chains.

$V4CUSTPREFIX="${FWPREFIX}/ipv4/"

$v4_Custom_Pre="$V4CUSTPREFIX/prerun.sh"
$v4_Custom_Trust="$V4CUSTPREFIX/trusted.sh"
$v4_Custom_EasyBlock="$V4CUSTPREFIX/easyblock.sh"
$v4_Custom_Filter="$V4CUSTPREFIX/filter.sh"
$v4_Custom_NAT="$V4CUSTPREFIX/nat.sh"
$v4_Custom_PortFw="$V4CUSTPREFIX/portfw.sh"
$v4_Custom_Post="$V4CUSTPREFIX/postrun.sh"

etc/ipv6/custom/prerules.sh → etc/ipv4/custom/prerun.sh 查看文件


+ 0
- 14
etc/ipv6/custom.conf 查看文件

@@ -1,14 +0,0 @@
# These are the custom files that can be used to inject rules during loading. Please don't change them
# unless you have a good reason.
# To allow variable propagation/change and some creative changes of rules that I haven't tought of,
# these files are sourced into the main file during setup of the order of chains.

$V6CUSTPREFIX="${FWPREFIX}/ipv6/"

$v6_Custom_Pre="$V6CUSTPREFIX/prerun.sh"
$v6_Custom_Trust="$V6CUSTPREFIX/trusted.sh"
$v6_Custom_EasyBlock="$V6CUSTPREFIX/easyblock.sh"
$v6_Custom_Filter="$V6CUSTPREFIX/filter.sh"
$v6_Custom_NAT="$V6CUSTPREFIX/nat.sh"
$v6_Custom_PortFw="$V6CUSTPREFIX/portfw.sh"
$v6_Custom_Post="$V6CUSTPREFIX/postrun.sh"

+ 6
- 0
etc/ipv6/custom/prerun.sh 查看文件

@@ -0,0 +1,6 @@
# This file is sourced by the main srfirewall program to inject
# custom commands/rules during specific moments of the firewall
# setup.
#
# In particular this file injects/commands rules:
# Before the main chains are setup.

+ 7
- 7
lib/iptables.inc 查看文件

@@ -83,23 +83,23 @@ function setup_iptables_chains {
# Set up rules - the order matters - we do it separately here
# for easy viewing of order
if [ -x ${v${IPVER}_Custom_Pre} ]; then . ${v${IPVER}_Custom_Pre}; fi
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/prerun.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/prerun.sh; fi
${VER_IPTABLES} -A INPUT -j ${InPreRules}
${VER_IPTABLES} -A OUTPUT -j ${OutPreRules}
if [ -x ${v${IPVER}_Custom_Trust} ]; then . ${v${IPVER}_Custom_Trust}; fi
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/trusted.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/trusted.sh; fi
${VER_IPTABLES} -A INPUT -j ${Trusted}
if [ -x ${v${IPVER}_Custom_EasyBlock} ]; then . ${v${IPVER}_Custom_EasyBlock}; fi
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/easyblock.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/easyblock.sh; fi
${VER_IPTABLES} -A INPUT -j ${InEasyBlock}
${VER_IPTABLES} -A OUTPUT -j ${OutEasyBlock}
if [ -x ${v${IPVER}_Custom_Filter} ]; then . ${v${IPVER}_Custom_Filter}; fi
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/filter.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/filter.sh; fi
${VER_IPTABLES} -A INPUT -j ${InFilter}
${VER_IPTABLES} -A OUTPUT -j ${OutFilter}
${VER_IPTABLES} -A FORWARD -j ${FwdFilter}
if [ -x ${v${IPVER}_Custom_NAT} ]; then . ${v${IPVER}_Custom_NAT}; fi
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/nat.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/nat.sh; fi
${VER_IPTABLES} -A POSTROUTING -j ${NAT}
if [ -x ${v${IPVER}_Custom_PortFw} ]; then . ${v${IPVER}_Custom_PortFw}; fi
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/portfw.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/portfw.sh; fi
${VER_IPTABLES} -A PREROUTING -j ${PortForward}
if [ -x ${v${IPVER}_Custom_Post} ]; then . ${v${IPVER}_Custom_Post}; fi
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/postrun.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/postrun.sh; fi
${VER_IPTABLES} -A INPUT -j ${InPostRules}
${VER_IPTABLES} -A OUTPUT -j ${OutPostRules}
}

正在加载...
取消
保存