bbruns@gmail.com 2014-03-31 23:37:38 +00:00
padre 1a46a2ac60
commit e190e321d0
Se han modificado 5 ficheros con 61 adiciones y 2 borrados

Ver fichero

@ -5,6 +5,7 @@
- Basic functionality implemented:
- Trusted IP source (IPv4/IPv6) - 3/30/2014
- MSS Clamping (IPv4/IPv6) - 3/30/2014
- Trusted DNS server as client (IPv4/IPv6) - 3/30/2014
=-=-=-=-= PRE 2.0 REWRITE =-=-=-=-=
1.1 - Brielle Bruns <bruns@2mbit.com>

Ver fichero

@ -151,6 +151,8 @@ if [ "${EnableIPv4}" == "yes" ]; then
[ "${Enablev4MSSClamp}" == "yes" ] && enable_mss_clamp ipv4
[ "${DNSClientUsev4ResolvConf}" == "yes" ] && allow_resolvconf_servers ipv4
[ "${DNSClientManualv4Servers}" ] && allow_dnsclient_manual ipv4 "${DNSClientManualv4Servers}"
[ "${Enablev4EasyBlock}" == "yes" ] && enable_easyblock ipv4
fi
# Do IPv6 IPTables Rules
@ -167,5 +169,6 @@ if [ "${EnableIPv6}" == "yes" ]; then
[ "${Enablev6MSSClamp}" == "yes" ] && enable_mss_clamp ipv6
[ "${DNSClientUsev6ResolvConf}" == "yes" ] && allow_resolvconf_servers ipv6
[ "${DNSClientManualv6Servers}" ] && allow_dnsclient_manual ipv6 "${DNSClientManualv6Servers}"
[ "${Enablev6EasyBlock" == "yes" ] && enable_easyblock ipv6
fi

Ver fichero

@ -36,4 +36,12 @@ ResolvConfv4File="/etc/resolv.conf"
# Uncomment below if you set above to no. You can still manually define your servers
# here if you want. Useful at times.
# Values: space separated IP list of DNS servers
#DNSClientManualv4Servers=""
#DNSClientManualv4Servers=""
# Enable the EasyBlock access list
# This is a simple/easy way to block traffic in or out,
# no complex options. Use the Filter options for more
# complex ACLs
# Config file: ipv4/easyblock.conf
# Values: no | yes (default)
Enablev4EasyBlock="yes"

Ver fichero

@ -36,4 +36,12 @@ ResolvConfv6File="/etc/resolv.conf"
# Uncomment below if you set above to no. You can still manually define your servers
# here if you want. Useful at times.
# Values: space separated IP list of DNS servers
#DNSClientManualv6Servers=""
#DNSClientManualv6Servers=""
# Enable the EasyBlock access list
# This is a simple/easy way to block traffic in or out,
# no complex options. Use the Filter options for more
# complex ACLs
# Config file: ipv6/easyblock.conf
# Values: no | yes (default)
Enablev6EasyBlock="yes"

Ver fichero

@ -200,6 +200,7 @@ function allow_resolvconf_servers {
[[ ${type} != "nameserver" ]] && continue
# If we see a : in the server variable, we are most likely dealing with an ipv6 address
([[ ${server} =~ ":" ]] && [[ ${IP_VERSION} = "ipv4" ]]) && continue
([[ ${server} !~ ":" ]] && [[ ${IP_VERSION} = "ipv6" ]]) && continue
${debug} ${DebugColor} "${FUNCNAME}: Added ${server} to DNS client trusted list"
${VER_IPTABLES} -A ${OutPreRules} -p udp -s ${server} --sport 1024:65535 --dport 53 -j ACCEPT
${VER_IPTABLES} -A ${InPreRules} -p udp -d ${server} --dport 1024:65535 --sport 53 -j ACCEPT
@ -227,4 +228,42 @@ function allow_dnsclient_manual {
${VER_IPTABLES} -A ${InPreRules} -p tcp -d ${i} --dport 1024:65535 --sport 53 -j ACCEPT
done
${debug} ${DebugColor} "${FUNCNAME}: done"
}
function enable_easyblock {
IP_VERSION=$1
case $IP_VERSION in
ipv6) VER_IPTABLES=${IP6TABLES};
IPVER="6" ;;
ipv4|*) VER_IPTABLES=${IPTABLES}
IPVER="4" ;;
esac
${debug} ${DebugColor} "${FUNCNAME}: loading"
if [ -e "${FWCONFIGDIR}/ipv${IPVER}/easyblock.conf" ]; then
${debug} ${DebugColor} "${FUNCNAME}: read ${FWCONFIGDIR}/ipv${IPVER}/easyblock.conf successful"
while read -r direction interface address port; do
[[ ${direction} = \#* ]] && continue
# Do some creative work with variables to make building the iptables rules fairly painless
[[ ${port} != "-" ]] && port="--dport ${port}"
([[ ${address} != "-" ]] && [[ ${direction} == "IN" ]] && address="-s ${address}"
([[ ${address} != "-" ]] && [[ ${direction} == "OUT" ]] && address="-d ${address}"
([[ ${interface} != "-" ]] && [[ ${direction} == "IN" ]] && interface="-i ${interface}"
([[ ${interface} != "-" ]] && [[ ${direction} == "OUT" ]] && interface="-o ${interface}"
[[ ${direction} == "OUT" ]] && chain="${OutEasyBlock}"
[[ ${direction} == "IN" ]] && chain="${InEasyBlock}"
${debug} ${DebugColor} "${FUNCNAME}: Read: ${direction} ${interface} ${address} ${port}"
# Blank variables that we're not going to use.
[[ ${interface} == "-" ]] && interface=""
[[ ${port} == "-" ]] && port=""
[[ ${address} == "-" ]] && address=""
${VER_IPTABLES} -A ${chain} ${interface} ${address} ${port}
done < "${FWCONFIGDIR}/ipv${IPVER}/easyblock.conf"
${debug} ${DebugColor} "${FUNCNAME}: done"
}