SRFirewall/lib/iptables.inc

673 lines
35 KiB
Bash

#!/bin/bash
# By Brielle Bruns <bruns@2mbit.com>
# URL: http://www.sosdg.org/freestuff/firewall
# License: GPLv3
#
# Copyright (C) 2009 - 2014 Brielle Bruns
# Copyright (C) 2009 - 2014 The Summit Open Source Development Group
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# iptables_rules_flush (ipv6|ipv4)
# Clear all rules from iptables - be very careful in how this is called as it
# could easily lock out the user from the network. Best way to be safe, is to
# call iptables_policy_reset first then this function.
function iptables_rules_flush {
IP_VERSION=$1
case $IP_VERSION in
ipv6) VER_IPTABLES=${IP6TABLES} ; TABLE_NAMES=/proc/net/ip6_tables_names ;;
ipv4|*) VER_IPTABLES=${IPTABLES} ; TABLE_NAMES=/proc/net/ip_tables_names ;;
esac
${display} GREEN "Flushing ${IP_VERSION} rules..."
${VER_IPTABLES} -P INPUT ACCEPT &>/dev/null
${VER_IPTABLES} -P OUTPUT ACCEPT &>/dev/null
${VER_IPTABLES} -P FORWARD ACCEPT &>/dev/null
${VER_IPTABLES} -F &>/dev/null
${VER_IPTABLES} -X &>/dev/null
${VER_IPTABLES} -F INPUT &>/dev/null
${VER_IPTABLES} -F OUTPUT &>/dev/null
${VER_IPTABLES} -F FORWARD &>/dev/null
${VER_IPTABLES} -t nat -F &>/dev/null
${VER_IPTABLES} -t nat -X &>/dev/null
${VER_IPTABLES} -t mangle -F &>/dev/null
${VER_IPTABLES} -t mangle -X &>/dev/null
${VER_IPTABLES} -t raw -F &>/dev/null
${VER_IPTABLES} -t raw -X &>/dev/null
for i in `cat $TABLE_NAMES`; do
${VER_IPTABLES} -F -t $i &>/dev/null
done
}
# iptables_policy_set (ipv6|ipv4) (ACCEPT|DROP)
# Sets all policy rules to either ACCEPT or DROP for ipv4 or ipv6
# If no policy given, assume ACCEPT
function default_policy_set {
IP_VERSION=$1
INPOLICY=${2=ACCEPT}
OUTPOLICY=${3=ACCEPT}
FWDPOLICY=${4=ACCEPT}
case $IP_VERSION in
ipv6) VER_IPTABLES=${IP6TABLES} ;;
ipv4|*) VER_IPTABLES=${IPTABLES} ;;
esac
${display} RED "Setting ${IP_VERSION} policies to INPUT:${INPOLICY} OUTPUT:${OUTPOLICY} FORWARD:${FWDPOLICY}..."
${VER_IPTABLES} --policy INPUT ${INPOLICY}
${VER_IPTABLES} --policy OUTPUT ${OUTPOLICY}
${VER_IPTABLES} --policy FORWARD ${FWDPOLICY}
}
# setup_iptables_chains (ipv4|ipv6)
# Creates the default chains when called
function setup_iptables_chains {
IP_VERSION=$1
case $IP_VERSION in
ipv6) VER_IPTABLES=${IP6TABLES};
IPVER="6" ;;
ipv4|*) VER_IPTABLES=${IPTABLES}
IPVER="4" ;;
esac
# Create the actual chains
${display} GREEN "Setting up chains for ${IP_VERSION}..."
${VER_IPTABLES} -N ${InPreRules}
${VER_IPTABLES} -N ${OutPreRules}
${VER_IPTABLES} -N ${InEasyBlock}
${VER_IPTABLES} -N ${OutEasyBlock}
${VER_IPTABLES} -N ${InFilter}
${VER_IPTABLES} -N ${OutFilter}
${VER_IPTABLES} -N ${FwdFilter}
([[ ${IPVER} == "4" ]] && [[ ${Enablev4NAT} == "yes" ]]) && ${VER_IPTABLES} -N ${NAT} -t nat
([[ ${IPVER} == "6" ]] && [[ ${Enablev6NAT} == "yes" ]]) && ${VER_IPTABLES} -N ${NAT} -t nat
([[ ${IPVER} == "4" ]] && [[ ${Enablev4NAT} == "yes" ]]) && ${VER_IPTABLES} -N ${PortForward} -t nat
([[ ${IPVER} == "6" ]] && [[ ${Enablev6NAT} == "yes" ]]) && ${VER_IPTABLES} -N ${PortForward} -t nat
[[ ${IPVER} == "6" ]] && ${VER_IPTABLES} -N ${v6ICMP}
${VER_IPTABLES} -N ${InPostRules}
${VER_IPTABLES} -N ${OutPostRules}
# Set up rules - the order matters - we do it separately here
# for easy viewing of order
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/prerun.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/prerun.sh; fi
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up InPreRules"
${VER_IPTABLES} -A INPUT -j ${InPreRules}
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up OutPreRules"
${VER_IPTABLES} -A OUTPUT -j ${OutPreRules}
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/easyblock.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/easyblock.sh; fi
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up InEasyBlock"
${VER_IPTABLES} -A INPUT -j ${InEasyBlock}
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up OutEasyBlock"
${VER_IPTABLES} -A OUTPUT -j ${OutEasyBlock}
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/filter.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/filter.sh; fi
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up InFilter"
${VER_IPTABLES} -A INPUT -j ${InFilter}
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up OutFilter"
${VER_IPTABLES} -A OUTPUT -j ${OutFilter}
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up FwdFilter"
${VER_IPTABLES} -A FORWARD -j ${FwdFilter}
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/nat.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/nat.sh; fi
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up NAT"
([[ ${IPVER} == "4" ]] && [[ ${Enablev4NAT} == "yes" ]]) && ${VER_IPTABLES} -A POSTROUTING -t nat -j ${NAT}
([[ ${IPVER} == "6" ]] && [[ ${Enablev6NAT} == "yes" ]]) && ${VER_IPTABLES} -A POSTROUTING -t nat -j ${NAT}
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/portfw.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/portfw.sh; fi
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up PortForward"
([[ ${IPVER} == "4" ]] && [[ ${Enablev4NAT} == "yes" ]]) && ${VER_IPTABLES} -A PREROUTING -t nat -j ${PortForward}
([[ ${IPVER} == "6" ]] && [[ ${Enablev6NAT} == "yes" ]]) && ${VER_IPTABLES} -A PREROUTING -t nat -j ${PortForward}
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/postrun.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/postrun.sh; fi
[[ ${IPVER} == "6" ]] && ${VER_IPTABLES} -A INPUT -j ${v6ICMP}
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up InPostRules"
${VER_IPTABLES} -A INPUT -j ${InPostRules}
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up OutPostRules"
${VER_IPTABLES} -A OUTPUT -j ${OutPostRules}
}
function allow_all_loopback {
IP_VERSION=$1
case $IP_VERSION in
ipv6) VER_IPTABLES=${IP6TABLES};
IPVER="6" ;;
ipv4|*) VER_IPTABLES=${IPTABLES}
IPVER="4" ;;
esac
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loaded"
${VER_IPTABLES} -A ${InPreRules} -i lo -j ACCEPT
${VER_IPTABLES} -A ${OutPreRules} -o lo -j ACCEPT
}
function allow_trusted_hosts {
IP_VERSION=$1
case $IP_VERSION in
ipv6) VER_IPTABLES=${IP6TABLES};
IPVER="6" ;;
ipv4|*) VER_IPTABLES=${IPTABLES}
IPVER="4" ;;
esac
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
if [ -e "${FWCONFIGDIR}/ipv${IPVER}/trusted.conf" ]; then
for i in `grep -v "\#" "${FWCONFIGDIR}/ipv${IPVER}/trusted.conf"`; do
${VER_IPTABLES} -A ${InPreRules} -s $i -j ACCEPT
${VER_IPTABLES} -A ${OutPreRules} -d $i -j ACCEPT
done
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
else
${display} RED "File Missing: ${FWCONFIGDIR}/ipv${IPVER}/trusted.conf"
${display} RED "Error: can not load trusted hosts file."
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} failed"
fi
}
function enable_mss_clamp {
IP_VERSION=$1
case $IP_VERSION in
ipv6) VER_IPTABLES=${IP6TABLES};
IPVER="6" ;;
ipv4|*) VER_IPTABLES=${IPTABLES}
IPVER="4" ;;
esac
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
if [ -e "${FWCONFIGDIR}/ipv${IPVER}/mss-clamp.conf" ]; then
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} read ${FWCONFIGDIR}/ipv${IPVER}/mss-clamp.conf successful"
while read -r interface mss type msssize; do
[[ ${interface} = \#* ]] && continue
[[ ${interface} = "" ]] && continue
[[ ${interface} == "all" ]] && isallinterfaces="yes"
#[[ -z ${mss} ]] && mss="-"
[[ ${mss} != "-" ]] && mss="-m tcpmss --mss ${mss}"
[[ ${mss} == "-" ]] && mss=""
[[ -z ${type} ]] && type="-"
[[ ${type} == "-" ]] && type="out"
[[ ${type} == "out" ]] && type="${OutFilter}"
[[ ${type} == "fwd" ]] && type="${FwdFilter}"
[[ -z ${msssize} ]] && msssize="-"
[[ ${msssize} != "-" ]] && msssize="--set-mss ${msssize}"
[[ ${msssize} == "-" ]] && msssize="--clamp-mss-to-pmtu"
#[[ ${interface} != "all" ]] && interface="-o ${interface}"
[[ ${type} == "${OutFilter}" ]] && interface="-o ${interface}"
[[ ${type} == "${FwdFilter}" ]] && interface="-o ${interface}"
[[ ${isallinterfaces} == "yes" ]] && interface=""
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Read: ${interface} ${mss} ${type} ${msssize}"
${VER_IPTABLES} -A ${type} -p tcp --tcp-flags SYN,RST SYN -j TCPMSS \
${interface} ${mss} ${msssize}
unset interface mss type msssize isallinterfaces
done < "${FWCONFIGDIR}/ipv${IPVER}/mss-clamp.conf"
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
else
${display} RED "File Missing: ${FWCONFIGDIR}/ipv${IPVER}/mss-clamp.conf"
${display} RED "Error: can not load mss clamp file."
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} failed"
fi
}
function allow_resolvconf_servers {
IP_VERSION=$1
case $IP_VERSION in
ipv6) VER_IPTABLES=${IP6TABLES};
IPVER="6" ;;
ipv4|*) VER_IPTABLES=${IPTABLES}
IPVER="4" ;;
esac
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
[[ ${IP_VERSION} == "ipv4" ]] && ResolvConfFile="${ResolvConfv4File}"
[[ ${IP_VERSION} == "ipv6" ]] && ResolvConfFile="${ResolvConfv6File}"
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Using ${ResolvConfFile} as resolv.conf"
while read -r type server; do
[[ ${type} != "nameserver" ]] && continue
[[ ${type} = "" ]] && continue
([[ ${server} =~ ":" ]] && [[ ${IP_VERSION} = "ipv4" ]]) && continue
([[ ! ${server} =~ ":" ]] && [[ ${IP_VERSION} = "ipv6" ]]) && continue
use_conntrack="no"
([[ ${IP_VERSION} == "ipv4" ]] && [[ ${Enablev4ConnectionTracking} == "yes" ]]) && use_conntrack="yes"
([[ ${IP_VERSION} == "ipv6" ]] && [[ ${Enablev6ConnectionTracking} == "yes" ]]) && use_conntrack="yes"
if [[ ${use_conntrack} == "yes" ]]; then
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Added ${server} to conntrack list for DNS traffic"
${VER_IPTABLES} -A ${OutPreRules} -p udp -d ${server} --dport 53 ${M_STATE} ${C_STATE} NEW,ESTABLISHED -j ACCEPT
${VER_IPTABLES} -A ${InPreRules} -p udp -s ${server} --sport 53 ${M_STATE} ${C_STATE} ESTABLISHED,RELATED -j ACCEPT
else
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Added ${server} to DNS client trusted list"
${VER_IPTABLES} -A ${OutPreRules} -p udp -s ${server} --sport 1024:65535 --dport 53 -j ACCEPT
${VER_IPTABLES} -A ${InPreRules} -p udp -d ${server} --dport 1024:65535 --sport 53 -j ACCEPT
#${VER_IPTABLES} -A ${OutPreRules} -p tcp -s ${server} --sport 1024:65535 --dport 53 -j ACCEPT
#${VER_IPTABLES} -A ${InPreRules} -p tcp -d ${server} --dport 1024:65535 --sport 53 -j ACCEPT
fi
done < "${ResolvConfFile}"
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
}
function allow_dnsclient_manual {
IP_VERSION=$1
case $IP_VERSION in
ipv6) VER_IPTABLES=${IP6TABLES};
IPVER="6" ;;
ipv4|*) VER_IPTABLES=${IPTABLES}
IPVER="4" ;;
esac
DNS_SERVERS="$2"
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
use_conntrack="no"
([[ ${IP_VERSION} == "ipv4" ]] && [[ ${Enablev4ConnectionTracking} == "yes" ]]) && use_conntrack="yes"
([[ ${IP_VERSION} == "ipv6" ]] && [[ ${Enablev6ConnectionTracking} == "yes" ]]) && use_conntrack="yes"
for i in ${DNS_SERVERS}; do
if [[ ${use_conntrack} == "yes" ]]; then
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Added ${server} to conntrack list for DNS traffic"
${VER_IPTABLES} -A ${OutPreRules} -p udp -d ${i} --dport 53 ${M_STATE} ${C_STATE} NEW,ESTABLISHED -j ACCEPT
${VER_IPTABLES} -A ${InPreRules} -p udp -s ${i} --sport 53 ${M_STATE} ${C_STATE} ESTABLISHED,RELATED -j ACCEPT
else
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Added ${i} to DNS client trusted list"
${VER_IPTABLES} -A ${OutPreRules} -p udp -s ${i} --sport 1024:65535 --dport 53 -j ACCEPT
${VER_IPTABLES} -A ${InPreRules} -p udp -d ${i} --dport 1024:65535 --sport 53 -j ACCEPT
#${VER_IPTABLES} -A ${OutPreRules} -p tcp -s ${i} --sport 1024:65535 --dport 53 -j ACCEPT
#${VER_IPTABLES} -A ${InPreRules} -p tcp -d ${i} --dport 1024:65535 --sport 53 -j ACCEPT
fi
done
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
}
function enable_easyblock {
IP_VERSION=$1
case $IP_VERSION in
ipv6) VER_IPTABLES=${IP6TABLES};
IPVER="6" ;;
ipv4|*) VER_IPTABLES=${IPTABLES}
IPVER="4" ;;
esac
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
if [ -e "${FWCONFIGDIR}/ipv${IPVER}/easyblock.conf" ]; then
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} read ${FWCONFIGDIR}/ipv${IPVER}/easyblock.conf successful"
while read -r direction interface address port protocol; do
[[ ${direction} = \#* ]] && continue
[[ ${direction} = "" ]] && continue
([[ ${direction} != "IN" ]] && [[ ${direction} != "OUT" ]]) \
&& ${display} RED "easyblock.conf: Error - must begin with IN/OUT: ${DEFAULT_COLOR}${direction} ${interface} ${address} ${port} ${protocol}" && continue
# Do some creative work with variables to make building the iptables rules fairly painless
[[ ${port} != "-" ]] && port="--dport ${port}"
([[ ${address} != "-" ]] && [[ ${direction} == "IN" ]]) && address="-s ${address}"
([[ ${address} != "-" ]] && [[ ${direction} == "OUT" ]]) && address="-d ${address}"
([[ ${interface} != "-" ]] && [[ ${direction} == "IN" ]]) && interface="-i ${interface}"
([[ ${interface} != "-" ]] && [[ ${direction} == "OUT" ]]) && interface="-o ${interface}"
[[ ${direction} == "OUT" ]] && chain="${OutEasyBlock}"
[[ ${direction} == "IN" ]] && chain="${InEasyBlock}"
[[ ${protocol} != "-" ]] && protocol="-p ${protocol}"
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Read: ${direction} ${interface} ${address} ${port} ${protocol}"
# Blank variables that we're not going to use.
[[ ${interface} == "-" ]] && interface=""
[[ ${port} == "-" ]] && port=""
[[ ${address} == "-" ]] && address=""
[[ ${protocol} == "-" ]] && protocol=""
${VER_IPTABLES} -A ${chain} ${interface} ${address} ${protocol} ${port} -j DROP
done < "${FWCONFIGDIR}/ipv${IPVER}/easyblock.conf"
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
fi
}
function enable_filtering {
IP_VERSION=$1
case $IP_VERSION in
ipv6) VER_IPTABLES=${IP6TABLES};
IPVER="6" ;;
ipv4|*) VER_IPTABLES=${IPTABLES}
IPVER="4" ;;
esac
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
if [ -e "${FWCONFIGDIR}/ipv${IPVER}/acl.conf" ]; then
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} read ${FWCONFIGDIR}/ipv${IPVER}/acl.conf successful"
while read -r direction action interface srcaddress srcport dstaddress dstport protocol syn state custom; do
[[ ${direction} = \#* ]] && continue
[[ ${direction} = "" ]] && continue
([[ ${direction} != "IN" ]] && [[ ${direction} != "OUT" ]]) \
&& ${display} RED "acl.conf: Error - must begin with IN/OUT: ${DEFAULT_COLOR}${direction} ${action} ${interface} ${srcaddress} ${srcport} ${dstaddress} ${dstport} ${protocol} ${syn} ${state}" && continue
([[ ${action} != "ACCEPT" ]] && [[ ${action} != "DROP" ]] && [[ ${action} != "REJECT" ]]) \
&& ${display} RED "acl.conf: Error - action must be either ACCEPT, DROP, or REJECT : ${DEFAULT_COLOR}${direction} ${action} ${interface} ${srcaddress} ${srcport} ${dstaddress} ${dstport} ${protocol} ${syn} ${state}" && continue
# Do some creative work with variables to make building the iptables rules fairly painless
[[ -z ${state} ]] && state="-"
([[ ${IP_VERSION} == "ipv4" ]] && [[ ${Enablev4ConnectionTracking} == "yes" ]] && [[ ! ${state} == "-" ]]) && conntrack_state="${M_STATE} ${C_STATE} ${state}"
([[ ${IP_VERSION} == "ipv6" ]] && [[ ${Enablev6ConnectionTracking} == "yes" ]] && [[ ! ${state} == "-" ]]) && conntrack_state="${M_STATE} ${C_STATE} ${state}"
[[ ${dstport} != "-" ]] && dstport="--dport ${dstport}"
[[ ${srcport} != "-" ]] && srcport="--sport ${srcport}"
[[ ${srcaddress} != "-" ]] && srcaddress="-s ${srcaddress}"
[[ ${dstaddress} != "-" ]] && dstaddress="-d ${dstaddress}"
([[ ${interface} != "-" ]] && [[ ${direction} == "IN" ]]) && interface="-i ${interface}"
([[ ${interface} != "-" ]] && [[ ${direction} == "OUT" ]]) && interface="-o ${interface}"
[[ ${direction} == "OUT" ]] && chain="${OutFilter}"
[[ ${direction} == "IN" ]] && chain="${InFilter}"
[[ ${protocol} != "-" ]] && protocol="-p ${protocol}"
[[ ${action} == "REJECT" ]] && action="REJECT --reject-with tcp-reset"
[[ ${syn} == "syn" ]] && syn="--syn"
[[ ${syn} == "notsyn" ]] && syn="! --syn"
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR}${direction} ${action} ${interface} ${srcaddress} ${srcport} ${dstaddress} ${dstport} ${protocol} ${syn} ${custom}"
# Blank variables that we're not going to use.
[[ ${interface} == "-" ]] && interface=""
[[ ${dstport} == "-" ]] && dstport=""
[[ ${srcport} == "-" ]] && srcport=""
[[ ${dstaddress} == "-" ]] && dstaddress=""
[[ ${srcaddress} == "-" ]] && srcaddress=""
[[ ${protocol} == "-" ]] && protocol=""
[[ ${syn} == "-" ]] && syn=""
[[ ${custom} == "-" ]] && custom=""
${VER_IPTABLES} -A ${chain} ${interface} ${protocol} ${srcaddress} ${srcport} ${syn} ${dstaddress} ${dstport} ${conntrack_state} ${custom} -j ${action}
unset direction action interface srcaddress srcport dstaddress dstport protocol syn state custom conntrack_state
done < "${FWCONFIGDIR}/ipv${IPVER}/acl.conf"
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
fi
}
function enable_forwarding {
IP_VERSION=$1
case $IP_VERSION in
ipv6) VER_IPTABLES=${IP6TABLES};
IPVER="6" ;;
ipv4|*) VER_IPTABLES=${IPTABLES}
IPVER="4" ;;
esac
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
if [ -e "${FWCONFIGDIR}/ipv${IPVER}/forward.conf" ]; then
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} read ${FWCONFIGDIR}/ipv${IPVER}/forward.conf successful"
while read -r action srcinterface srcaddress dstinterface dstaddress bidirectional srcport dstport protocol syn state custom; do
unset conntrack_state conntrack_udp_new revsrcaddress revdstaddress revdstinterface revsrcinterface revsrcport revdstport
[[ ${action} = \#* ]] && continue
[[ -z ${action} ]] && continue
([[ ${action} != "ACCEPT" ]] && [[ ${action} != "DROP" ]]) \
&& ${display} RED "forward.conf: Error - action must be either ACCEPT or DROP : ${DEFAULT_COLOR}${action} ${srcinterface} ${srcaddress} ${dstinterface} ${dstaddress} ${bidirectional} ${srcport} ${dstport} ${protocol} ${syn} ${state}" && continue
# Do some creative work with variables to make building the iptables rules fairly painless
# Although these next few rules seems like they duplicate some work, they
# actually make handling later rules simpler even if we end up blanking
# them yet again.
[[ -z ${dstport} ]] && dstport="-"
[[ -z ${srcport} ]] && srcport="-"
[[ -z ${protocol} ]] && protocol="-"
[[ -z ${syn} ]] && syn="-"
[[ -z ${state} ]] && state="-"
#([[ ${IP_VERSION} == "ipv4" ]] && [[ ${Enablev4ConnectionTracking} == "yes" ]] && [[ ${state} == "-" ]]) && conntrack_state="${M_STATE} ${C_STATE} ESTABLISHED,RELATED"
#([[ ${IP_VERSION} == "ipv6" ]] && [[ ${Enablev6ConnectionTracking} == "yes" ]] && [[ ${state} == "-" ]]) && conntrack_state="${M_STATE} ${C_STATE} ESTABLISHED,RELATED"
([[ ${IP_VERSION} == "ipv4" ]] && [[ ${Enablev4ConnectionTracking} == "yes" ]] && [[ ! ${state} == "-" ]]) && conntrack_state="${M_STATE} ${C_STATE} ${state}"
([[ ${IP_VERSION} == "ipv6" ]] && [[ ${Enablev6ConnectionTracking} == "yes" ]] && [[ ! ${state} == "-" ]]) && conntrack_state="${M_STATE} ${C_STATE} ${state}"
([[ ${bidirectional} == "yes" ]] && [[ ${srcaddress} != "-" ]]) && revsrcaddress="-d ${srcaddress}"
([[ ${bidirectional} == "yes" ]] && [[ ${dstaddress} != "-" ]]) && revdstaddress="-s ${dstaddress}"
([[ ${bidirectional} == "yes" ]] && [[ ${dstinterface} != "-" ]]) && revdstinterface="-i ${dstinterface}"
([[ ${bidirectional} == "yes" ]] && [[ ${srcinterface} != "-" ]]) && revsrcinterface="-o ${srcinterface}"
[[ ${srcaddress} != "-" ]] && srcaddress="-s ${srcaddress}"
[[ ${dstaddress} != "-" ]] && dstaddress="-d ${dstaddress}"
[[ ${srcinterface} != "-" ]] && srcinterface="-i ${srcinterface}"
[[ ${dstinterface} != "-" ]] && dstinterface="-o ${dstinterface}"
([[ ${syn} == "syn" ]] && [[ ! -z ${conntrack_state} ]]) && conntrack_udp_new=",NEW"
([[ ${syn} == "syn" ]] && [[ ${protocol} == "udp" ]]) && syn="-"
[[ ${syn} == "syn" ]] && syn="--syn"
[[ ${syn} == "notsyn" ]] && syn="! --syn"
[[ ${dstport} != "-" ]] && dstport="--dport ${dstport}"
[[ ${srcport} != "-" ]] && srcport="--sport ${srcport}"
([[ ${bidirectional} == "yes" ]] && [[ ${srcport} != "-" ]]) && revsrcport="--dport ${srcport}"
([[ ${bidirectional} == "yes" ]] && [[ ${dstport} != "-" ]]) && revdstport="--sport ${dstport}"
[[ ${protocol} != "-" ]] && protocol="-p ${protocol}"
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR}${action} ${srcinterface} ${srcaddress} ${dstinterface} ${dstaddress} ${bidirectional} ${srcport} ${dstport} ${protocol} ${syn} ${state}"
# Blank variables that we're not going to use.
[[ ${srcinterface} == "-" ]] && srcinterface=""
[[ ${dstinterface} == "-" ]] && dstinterface=""
[[ ${dstaddress} == "-" ]] && dstaddress=""
[[ ${srcaddress} == "-" ]] && srcaddress=""
[[ ${dstport} == "-" ]] && dstport=""
[[ ${srcport} == "-" ]] && srcport=""
[[ ${syn} == "-" ]] && syn=""
[[ ${state} == "-" ]] && state=""
[[ ${protocol} == "-" ]] && protocol=""
[[ ${bidirectional} == "-" ]] && bidirectional="no"
[[ ${custom} == "-" ]] && custom=""
${VER_IPTABLES} -A ${FwdFilter} ${protocol} ${srcinterface} ${srcaddress} ${srcport} ${syn} ${dstinterface} ${dstaddress} ${dstport} ${conntrack_state} ${custom} -j ${action}
[[ ${bidirectional} == "yes" ]] && ${VER_IPTABLES} -A ${FwdFilter} ${protocol} ${revsrcinterface} ${revsrcaddress} ${revsrcport} ${syn} ${revdstinterface} ${revdstaddress} ${revdstport} ${conntrack_state} ${custom} -j ${action}
unset action srcinterface srcaddress dstinterface dstaddress bidirectional srcport dstport protocol syn state custom conntrack_state
done < "${FWCONFIGDIR}/ipv${IPVER}/forward.conf"
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
fi
}
function enable_nat {
IP_VERSION=$1
case $IP_VERSION in
ipv6) VER_IPTABLES=${IP6TABLES};
IPVER="6" ;;
ipv4|*) VER_IPTABLES=${IPTABLES}
IPVER="4" ;;
esac
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
([[ ${IPVER} == "4" ]] && [[ ${Enablev4ConnectionTracking} != "yes" ]]) && ${display} RED "${FUNCNAME}: ERROR:${DEFAULT_COLOR} Unable to load NAT rules if Enablev4ConnectionTracking=no" && return 1
([[ ${IPVER} == "6" ]] && [[ ${Enablev6ConnectionTracking} != "yes" ]]) && ${display} RED "${FUNCNAME}: ERROR:${DEFAULT_COLOR} Unable to load NAT rules if Enablev6ConnectionTracking=no" && return 1
if [ -e "${FWCONFIGDIR}/ipv${IPVER}/nat.conf" ]; then
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} read ${FWCONFIGDIR}/ipv${IPVER}/nat.conf successful"
while read -r type srcinterface srcaddress dstinterface dstaddress custom; do
[[ ${type} = \#* ]] && continue
[[ ${type} = "" ]] && continue
([[ ${type} != "SNAT" ]] && [[ ${type} != "MASQ" ]] && [[ ${type} != "NETMAP" ]] && [[ ${type} != "ACCEPT" ]]) \
&& ${display} RED "nat.conf: Error - must begin with SNAT/MASQ/NETMAP/ACCEPT: ${DEFAULT_COLOR}${type} ${srcinterface} ${srcaddress} ${dstinterface} ${dstaddress} ${custom}" && continue
# Do some creative work with variables to make building the iptables rules fairly painless
#[[ ${srcaddress} != "-" ]] && revsrcaddress="-d ${srcaddress}"
#[[ ${dstinterface} != "-" ]] && revdstinterface="-i ${dstinterface}"
#[[ ${srcinterface} != "-" ]] && revsrcinterface="-o ${srcinterface}"
#[[ ${srcinterface} != "-" ]] && srcinterface="-i ${srcinterface}"
[[ ${dstinterface} != "-" ]] && dstinterface="-o ${dstinterface}"
[[ ${srcaddress} != "-" ]] && srcaddress="-s ${srcaddress}"
([[ ${srcinterface} != "-" ]] && [[ ${type} == "SNAT" ]]) && srcinterface="-"
([[ ${dstinterface} != "-" ]] && [[ ${type} == "MASQ" ]]) && action="-j MASQUERADE"
([[ ${dstinterface} == "-" ]] && [[ ${type} == "MASQ" ]]) && \
${display} RED "nat.conf: Error - MASQ rule can not have empty destination interface: ${DEFAULT_COLOR}${type} ${srcinterface} ${srcaddress} ${dstinterface} ${dstaddress}" \
&& continue
([[ ${dstaddress} != "-" ]] && [[ ${type} == "ACCEPT" ]]) && action="-j ACCEPT" && dstaddress="-d ${dstaddress}"
([[ ${dstaddress} != "-" ]] && [[ ${type} == "SNAT" ]]) && action="-j SNAT" && dstaddress="--to-source ${dstaddress}"
([[ ${dstaddress} == "-" ]] && [[ ${type} == "SNAT" ]]) && \
${display} RED "nat.conf: Error - SNAT rule can not have empty destination address: ${DEFAULT_COLOR}${type} ${srcinterface} ${srcaddress} ${dstinterface} ${dstaddress}" \
&& continue
[[ ${type} == "NETMAP" ]] && action="-j NETMAP"
([[ ${custom} == "" ]] && [[ ${type} == "NETMAP" ]]) && \
${display} RED "nat.conf: Error - NETMAP rule can not have empty custom address: ${DEFAULT_COLOR}${type} ${srcinterface} ${srcaddress} ${dstinterface} ${dstaddress} ${custom}" \
&& continue
([[ ${custom} != "" ]] && [[ ${type} == "NETMAP" ]]) && custom="--to ${custom}"
([[ ${dstaddress} != "-" ]] && [[ ${type} == "NETMAP" ]]) && dstaddress="-d ${dstaddress}"
# If we use a source interface, the rule can't go in a POSTROUTING table like what NAT is, so we punt it to PREROUTING
# or it won't work. Plus we remove the destination interface too.
([[ ${srcinterface} != "-" ]] && [[ ${type} != "SNAT" ]]) && NAT="PREROUTING" && dstinterface="-" && srcinterface="-i ${srcinterface}"
#[[ ${srcinterface} != "-" ]] && NAT="PREROUTING" && dstinterface="-" && srcinterface="-i ${srcinterface}"
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR}${direction} ${action} ${srcinterface} ${srcaddress} ${srcport} ${dstinterface} ${dstaddress} ${dstport} ${protocol} ${custom}"
# Blank variables that we're not going to use.
[[ ${srcinterface} == "-" ]] && srcinterface=""
[[ ${dstinterface} == "-" ]] && dstinterface=""
[[ ${dstaddress} == "-" ]] && dstaddress=""
[[ ${srcaddress} == "-" ]] && srcaddress=""
[[ ${custom} == "-" ]] && custom=""
${VER_IPTABLES} -A ${NAT} -t nat ${srcinterface} ${srcaddress} ${action} ${dstinterface} ${dstaddress} ${custom}
#${VER_IPTABLES} -A ${FwdFilter} ${M_STATE} ${C_STATE} RELATED,ESTABLISHED,NEW ${srcinterface} ${srcaddress} ${dstinterface} -j ACCEPT
#${VER_IPTABLES} -A ${FwdFilter} ${M_STATE} ${C_STATE} RELATED,ESTABLISHED ${revsrcinterface} ${revsrcaddress} ${revdstinterface} -j ACCEPT
unset type srcinterface srcaddress dstinterface dstaddress custom
done < "${FWCONFIGDIR}/ipv${IPVER}/nat.conf"
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
fi
}
function enable_services {
IP_VERSION=$1
case $IP_VERSION in
ipv6) VER_IPTABLES=${IP6TABLES};
IPVER="6" ;;
ipv4|*) VER_IPTABLES=${IPTABLES}
IPVER="4" ;;
esac
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
if [ -e "${FWCONFIGDIR}/ipv${IPVER}/services.conf" ]; then
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} read ${FWCONFIGDIR}/ipv${IPVER}/services.conf successful"
while read -r service protocol interface address srcaddress; do
use_conntrack="no"
([[ ${IP_VERSION} == "ipv4" ]] && [[ ${Enablev4ConnectionTracking} == "yes" ]]) && conntrack_state="${M_STATE} ${C_STATE} NEW"
([[ ${IP_VERSION} == "ipv6" ]] && [[ ${Enablev6ConnectionTracking} == "yes" ]]) && conntrack_state="${M_STATE} ${C_STATE} NEW"
multiport="no"
[[ ${service} = \#* ]] && continue
[[ -z ${service} ]] && continue
[[ ${service} == "-" ]] \
&& ${display} RED "service.conf: Error - must begin with service name or port number: ${DEFAULT_COLOR}${service} ${protocol} ${interface} ${address} ${srcaddress}" && continue
[[ ${protocol} == "-" ]] \
&& ${display} RED "service.conf: Error - protocol can not be empty: ${DEFAULT_COLOR}${service} ${protocol} ${interface} ${address} ${srcaddress}" && continue
[[ ${service} =~ "," ]] && multiport="yes"
# Do some creative work with variables to make building the iptables rules fairly painless
([[ ${service} != "-" ]] && [[ ${multiport} != "yes" ]]) && service="--dport ${service}"
([[ ${service} != "-" ]] && [[ ${multiport} == "yes" ]]) && service="-m multiport --dports ${service}"
[[ ${protocol} != "-" ]] && protocol="-p ${protocol}"
[[ ${interface} != "-" ]] && interface="-i ${interface}"
[[ ${address} != "-" ]] && srcaddress="-d ${address}"
[[ ${srcaddress} != "-" ]] && srcaddress="-s ${srcaddress}"
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Read: ${service} ${protocol} ${interface} ${address} ${srcaddress}"
# Blank variables that we're not going to use.
[[ ${interface} == "-" ]] && interface=""
[[ ${address} == "-" ]] && address=""
[[ ${srcaddress} == "-" ]] && srcaddress=""
${VER_IPTABLES} -A ${InFilter} ${protocol} ${service} ${interface} ${address} ${srcaddress} ${conntrack_state} -j ACCEPT
unset service protocol interface address srcaddress conntrack_state
done < "${FWCONFIGDIR}/ipv${IPVER}/services.conf"
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
unset service protocol interface address srcaddress
fi
}
function enable_conntrack_int {
IP_VERSION=$1
case $IP_VERSION in
ipv6) VER_IPTABLES=${IP6TABLES};
IPVER="6" ;;
ipv4|*) VER_IPTABLES=${IPTABLES}
IPVER="4" ;;
esac
conntrack_int="$2"
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
if [[ ${conntrack_int} == "all" ]]; then
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Enabling conntrack on all interfaces"
${VER_IPTABLES} -A ${OutPreRules} ${M_STATE} ${C_STATE} ESTABLISHED,RELATED -j ACCEPT
${VER_IPTABLES} -A ${InPreRules} ${M_STATE} ${C_STATE} ESTABLISHED,RELATED -j ACCEPT
${VER_IPTABLES} -A ${OutPreRules} ${M_STATE} ${C_STATE} INVALID -j DROP
${VER_IPTABLES} -A ${InPreRules} ${M_STATE} ${C_STATE} INVALID -j DROP
else
for i in ${conntrack_int}; do
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Enabling conntrack on ${i}"
${VER_IPTABLES} -A ${OutPreRules} -o ${i} ${M_STATE} ${C_STATE} ESTABLISHED,RELATED -j ACCEPT
${VER_IPTABLES} -A ${InPreRules} -i ${i} ${M_STATE} ${C_STATE} ESTABLISHED,RELATED -j ACCEPT
${VER_IPTABLES} -A ${OutPreRules} -o ${i} ${M_STATE} ${C_STATE} INVALID -j DROP
${VER_IPTABLES} -A ${InPreRules} -i ${i} ${M_STATE} ${C_STATE} INVALID -j DROP
done
fi
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
}
function enable_portfw {
IP_VERSION=$1
case $IP_VERSION in
ipv6) VER_IPTABLES=${IP6TABLES};
IPVER="6" ;;
ipv4|*) VER_IPTABLES=${IPTABLES}
IPVER="4" ;;
esac
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
if [ -e "${FWCONFIGDIR}/ipv${IPVER}/portfw.conf" ]; then
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} read ${FWCONFIGDIR}/ipv${IPVER}/portfw.conf successful"
while read -r service protocol intip intport interface address srcaddress; do
use_conntrack="no"
([[ ${IP_VERSION} == "ipv4" ]] && [[ ${Enablev4ConnectionTracking} == "yes" ]]) && conntrack_state="${M_STATE} ${C_STATE} NEW"
([[ ${IP_VERSION} == "ipv6" ]] && [[ ${Enablev6ConnectionTracking} == "yes" ]]) && conntrack_state="${M_STATE} ${C_STATE} NEW"
[[ ${service} = \#* ]] && continue
[[ -z ${service} ]] && continue
[[ ${service} == "-" ]] \
&& ${display} RED "service.conf: Error - must begin with service name or port number: ${DEFAULT_COLOR}${service} ${intip} ${intport} ${protocol} ${interface} ${address} ${srcaddress}" && continue
[[ ${protocol} == "-" ]] \
&& ${display} RED "service.conf: Error - protocol can not be empty: ${DEFAULT_COLOR}${service} ${intip} ${intport} ${protocol} ${interface} ${address} ${srcaddress}" && continue
# Do some creative work with variables to make building the iptables rules fairly painless
# Although these next few rules seems like they duplicate some work, they
# actually make handling later rules simpler even if we end up blanking
# them yet again.
[[ -z ${interface} ]] && interface="-"
[[ -z ${address} ]] && address="-"
[[ -z ${srcaddress} ]] && srcaddress="-"
[[ ${service} != "-" ]] && service="--dport ${service}"
[[ ${protocol} != "-" ]] && protocol="-p ${protocol}"
[[ ${intip} != "-" ]] && intdest="--to-destination ${intip}:${intport}"
[[ ${interface} != "-" ]] && interface="-i ${interface}"
[[ ${intip} != "-" ]] && intip="-d ${intip}"
[[ ${intport} != "-" ]] && intport="--dport ${intport}"
[[ ${address} != "-" ]] && address="-d ${address}"
[[ ${srcaddress} != "-" ]] && srcaddress="-s ${srcaddress}"
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Read: ${service} ${protocol} ${intip} ${intport} ${interface} ${address} ${srcaddress}"
# Blank variables that we're not going to use.
[[ ${interface} == "-" ]] && interface=""
[[ ${address} == "-" ]] && address=""
[[ ${srcaddress} == "-" ]] && srcaddress=""
${VER_IPTABLES} -A ${PortForward} -t nat ${protocol} ${service} ${interface} ${address} ${srcaddress} -j DNAT ${intdest}
${VER_IPTABLES} -A ${FwdFilter} ${interface} ${intip} ${protocol} ${intport} ${srcaddress} ${conntrack_state} -j ACCEPT
unset service protocol intip intport interface address srcaddress conntrack_state
done < "${FWCONFIGDIR}/ipv${IPVER}/portfw.conf"
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
fi
}
function enable_v6_critical_icmp {
VER_IPTABLES=${IP6TABLES}
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
${VER_IPTABLES} -A ${v6ICMP} -p ipv6-icmp --icmpv6-type 1 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -p ipv6-icmp --icmpv6-type 2 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -p ipv6-icmp --icmpv6-type 3 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -p ipv6-icmp --icmpv6-type 4 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -p ipv6-icmp --icmpv6-type 133 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -p ipv6-icmp --icmpv6-type 134 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -p ipv6-icmp --icmpv6-type 135 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -p ipv6-icmp --icmpv6-type 136 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -p ipv6-icmp --icmpv6-type 137 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -p ipv6-icmp --icmpv6-type 141 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -p ipv6-icmp --icmpv6-type 142 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -s fe80::/10 -p ipv6-icmp --icmpv6-type 130 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -s fe80::/10 -p ipv6-icmp --icmpv6-type 131 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -s fe80::/10 -p ipv6-icmp --icmpv6-type 132 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -s fe80::/10 -p ipv6-icmp --icmpv6-type 143 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -p ipv6-icmp --icmpv6-type 148 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -p ipv6-icmp --icmpv6-type 149 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -s fe80::/10 -p ipv6-icmp --icmpv6-type 151 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -s fe80::/10 -p ipv6-icmp --icmpv6-type 152 -j ACCEPT
${VER_IPTABLES} -A ${v6ICMP} -s fe80::/10 -p ipv6-icmp --icmpv6-type 153 -j ACCEPT
}