SRFirewall/etc/ipv4/acl.conf

22 lines
985 B
Plaintext

# Filters / Access Control List
# Use this file to set up more complex access control lists.
# Use tabs or single space to separate
#
# <direction> <action> <interface> <src-address> <src-port> <dst-address> <dst-port> <protocol> <syn>
#
# Direction: Required ( IN | OUT )
# Action: Required (ACCEPT | DROP)
# Interface: Optional ( interface name, aka eth0 )
# Src Address: Optional ( source of traffic )
# Src Port: Optional ( source port, 1 - 65535, Requires Protocol )
# Dst Address: Optional ( destination of traffic )
# Dst Port: Optional ( destination port, 1 - 65535, Requires Protocol )
# Protocol: Optional, Required if port is specified ( tcp | udp )
# Syn: Optional, only match (not) syn packets (syn | notsyn )
# You can use '-' for optional fields
#============================================================
#<dir> <action> <interface> <src-address> <src-port> <dst-address> <dst-port> <protocol> <syn>
#IN ACCEPT eth0 10.0.0.1 22 - - tcp -
#IN DROP - - - - 22 tcp syn